Libra Creations

I used stainless steel rings in a Full Persian weave to make this necklace. I also used carnelian barrel beads as the focal. They range from translucent white to light orange in color. The clear accent beads are Czech glass beads. The necklace measures 23.5 inches in length and closes with a pewter toggle clasp.

The bead featured in this necklace came from mamacitabeadworks.etsy.com. It is made from hand cast pewter. With age the pewter pendant will take on a rich, oxidized patina. All that is needed to polish it is a polishing cloth like you would use for a sterling silver piece.

The necklace itself is made from stainless steel rings in a Full Persian weave. I used 18 gauge 1/4 inch rings to make this piece. It is 22 inches long and closes with a handmade hook clasp that is also made from stainless steel.

These earrings feature a tiny star made from stainless steel rings. The star itself is 3/4 of an inch wide. The earrings are just shy of two inches long from the tip of the ear wire to the bottom of the star. The ear hooks are surgical steel.

This choker is made to compliment the Steel Falls Earrings in the shop. I used 18 gauge, stainless steel rings to form the fall and the rosettes on the sides. The center ring is a 14 gauge stainless steel ring. The choker is 13 inches long and is adjustable to 15 inches. It closes with a handmade stainless steel hook clasp.

This necklace incorporates two elements that are new to me. I had a lot of fun making this one. The chain itself is made using 18 gauge 1/4 inch rings in a Full Persian weave, and the star is made up of a captive ring weave in various sized rings. The star measures 1 1/4 inches across and the over all length of the necklace is 20 inches. I used all stainless steel rings for this piece and it closes with a handmade stainless steel hook clasp.

These earrings are made with 3/16th inch anodized aluminum and steel rings. I used a Japanese weave. They measure 4 inches from the top of the ear wire to the bottom of the dangle. They are a bit longer then what I usually make but I really like them. The ear wires are made from surgical steel.

These earrings are a variation on an earlier design. This time I used much smaller anodized aluminum rings (18 gauge, 3/16th inch rings). They are 2 inches long from the top of the ear wire to the bottom of the dangle. The ear wires are surgical steel.

These earrings were a long time coming. I used 22 gauge stainless steel rings to make the three graduated birdcage strands. The beads on the bottom of each strand are jet colored Czech glass beads. They measure 3 inches and the ear wires are made from surgical steel.

I made this necklace custom. I used 16 gauge anodized aluminum rings in purple for the main body of the necklace. The larger rings are sterling silver as well as the chains for the falls. The beads are 4mm swarovski crystals in amethyst. The piece measures 16 inches long and closes with a handmade sterling silver hook clasp.

This chainmaille bracelet is made from sterling silver rings. I used 14 gauge 1/2 inch diameter rings for the large mobius circle focal, and 16 gauge 1/4 inch diameter rings for the smaller mobius circles. The whole piece measures 7 inches and is adjustable to 8.5 inches.

This chainmaille necklace is made from sterling silver rings. I used 14 gauge 1/2 inch diameter rings for the large mobius circle focal, and 16 gauge 1/4 inch diameter rings for the smaller mobius circles. The whole piece measures 18.5 inches and closes with a handmade hook clasp.

This chainmaille choker is made from sterling silver rings. I used 14 gauge 1/2 inch diameter rings for the large mobius circles accross the front, and I used 18 gauge 3/16th inch diameter rings to make the birdcage chains on the side of the piece. The beads are jasper in white and grey tones that I thought went nicely with the sterling silver. It whole piece measures 13.5 inches and is adjustable to 15.5 inches. It closes with a handmade sterling silver hook clasp.

This is a custom for my aunt. Her birthday is today. I used pink glazed ceramic cubes to accent this piece. The rings are 18 gauge rings in a Byzantine or birdcage weave. The piece measures 19.5 inches and closes with a handmade hook clasp.

This is a custom for my aunt. Her birthday is today. I used pink glazed ceramic cubes to accent this piece. The rings are 18 gauge rings in a Byzantine or birdcage weave. The piece measures 19.5 inches and closes with a handmade hook clasp.

This chain maille chocker is made using 18 gauge stainless steel rings in a birdcage or Byzantine weave and 14 gauge rings in a mobius circle weave. I used a glazed porcelain focal bead that measures 35 mm in length. This piece measures 14.5 inches and is adjustable to 17.5 inches, allowing it to be work as a necklace depending on you mood. The choker closes with a handmade stainless steel hook clasp.

This chain maille chocker is made using 18 gauge stainless steel rings in a birdcage or Byzantine weave and 14 gauge rings in a mobius circle weave. I used a glazed porcelain focal bead that measures 35 mm in length. This piece measures 14.5 inches and is adjustable to 17.5 inches, allowing it to be work as a necklace depending on you mood. The choker closes with a handmade stainless steel hook clasp.

This chain maille necklace is one of my favorite designs. I used 18 gauge, stainless steel rings to make the piece. The weave used in a Byzantine or birdcage weave. The necklace is accented with 5 large amethyst nuggets. The necklace measures 18 inches and can be made shorter of longer as needed. It closes with a handmade, stainless steel hook clasp.

This chain maille bracelet is made using 18 gauge, stainless steel rings. I used a Byzantine or birdcage weave to make up the sides of the bracelet. There is a single amethyst nugget accenting the bracelet. The piece is 7 inches long and is adjustable to 8 inches. The bracelet closes with a handmade hook clasp.

My newest piece featuring a few unusual beads. The chainmaille choker is made using 2 sized rings, a 14 gauge ring that makes up the mobius circles and 18 gauge rings that make up the Byzantine weave on the sides. Both rings are stainless steel. The center bead is a carved Tajur nut and is 27 mm long. The two side beads are horn beads measuring 18 mm long. The necklace is 14 inches and is adjustable to 17 inches. The choker closes with a hand made, stainless steel, hook clasp.

My newest piece featuring a few unusual beads. The chainmaille choker is made using 2 sized rings, a 14 gauge ring that makes up the mobius circles and 18 gauge rings that make up the Byzantine weave on the sides. Both rings are stainless steel. The center bead is a carved Tajur nut and is 27 mm long. The two side beads are horn beads measuring 18 mm long. The necklace is 14 inches and is adjustable to 17 inches. The choker closes with a hand made, stainless steel, hook clasp.